Sealing rubber for aluminum profile (2 pcs.) FSE21038

Double lip seal for sealing glass or acrylic shower doors from 5 to 8 mm thick

Preparation:

If necessary, remove the old seal, remove traces of glue or silicone, clean various residues

Measure the width of your door

Transfer it to the joint, cut the hard part using a single-blade cutter or fine saw, and the flexible part with a chisel or cutter.

Instructions for use:

6 to 8mm doors: Attach or slide the seal along the bottom of the door to the desired location

5mm doors: First apply silicone to all clear surfaces or Joint & Fix Cristal, then attach or slide the seal along the bottom of the door to where required.

Product advantages:

Easy to implement

Attaches to the shower door

Storage:

Store at temperatures from -5°C to +40°C.

At 20°C, the shelf life of the product is 10 years.

Tip:

In cold weather, to facilitate installation, we recommend that it be placed at room temperature for 1 hour before installation. place.

Dismantled doors may be easier to work with